| REMQ5U7Y1B | ||||
|---|---|---|---|---|
| Sound pressure level | Cooling | Nom. | dBA | 57.0 (5) |
| Standard Accessories | Installation and operation manual | 1 | ||
| Connection pipes | 1 | |||
| Capacity range | HP | 5 | ||
| Operation range | Cooling | Max. | °CDB | 43.0 |
| Min. | °CDB | -5.0 | ||
| Heating | Min. | °CWB | -20.0 | |
| Max. | °CWB | 15.5 | ||
| Maximum number of connectable indoor units | 64 (3) | |||
| Compressor | Type | Hermetically sealed scroll compressor | ||
| Weight | Unit | kg | 230 | |
| Refrigerant | Charge | TCO2Eq | 20.2 | |
| GWP | 2,087.5 | |||
| Charge | kg | 9.7 | ||
| Type | R-410A | |||
| Indoor index connection | Min. | 62.5 | ||
| Max. | 162.5 | |||
| Cooling capacity | Prated,c | kW | 14.0 (1) | |
| Piping connections | HP/LP gas | OD | mm | 15.9 |
| Liquid | OD | mm | 9.5 | |
| Type | Braze connection | |||
| Gas | OD | mm | 19.1 | |
| Type | Braze connection | |||
| Sound power level | Cooling | Nom. | dBA | 78.0 (4) |
| Dimensions | Unit | Width | mm | 930 |
| Depth | mm | 765 | ||
| Height | mm | 1,685 | ||
| Fan | External static pressure | Max. | Pa | 78 |
| Power supply | Phase | 3N~ | ||
| Name | Y1 | |||
| Frequency | Hz | 50 | ||
| Voltage | V | 380-415 | ||
| Notes | (1) - Cooling: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDB; equivalent piping length: 7.5m; level difference: 0m | |||
| (2) - Heating: indoor temp. 20°CDB; outdoor temp. 7°CDB, 6°CWB; equivalent refrigerant piping: 7.5m; level difference: 0m | ||||
| (3) - Actual number of connectable indoor units depends on the indoor unit type and the connection ratio restriction for the system (50% ≤ CR ≤ 120%) | ||||
| (4) - Sound power level is an absolute value that a sound source generates. | ||||
| (5) - Sound pressure level is a relative value, depending on the distance and acoustic environment. For more details, please refer to the sound level drawings. | ||||
| (6) - Refer to refrigerant pipe selection or installation manual | ||||
| (7) - RLA is based on following conditions: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDB | ||||
| (8) - MSC means the maximum current during start up of the compressor. This unit uses only inverter compressors. Starting current is always ≤ max. running current. | ||||
| (9) - In accordance with EN/IEC 61000-3-12, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply wih Ssc ≥ minimum Ssc value | ||||
| (10) - MCA must be used to select the correct field wiring size. The MCA can be regarded as the maximum running current. | ||||
| (11) - MFA is used to select the circuit breaker and the ground fault circuit interrupter (earth leakage circuit breaker). | ||||
| (12) - FLA means the nominal running current of the fan | ||||
| (13) - Maximum allowable voltage range variation between phases is 2%. | ||||
| (14) - Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits. | ||||
| (15) - The AUTOMATIC ESEER value corresponds with normal VRV4 Heat Recovery operation, taking into account advanced energy saving operation functionality (variable refrigerant temperature control operation ) | ||||
| (16) - The STANDARD ESEER value corresponds with normal VRV4 Heat Recovery operation, not taking into account advanced energy saving operation functionality | ||||
| (17) - Sound values are measured in a semi-anechoic room. | ||||
| (18) - Soundpressure system [dBA] = 10*log[10^(A/10)+10^(B/10)+10^(C/10)] , with Unit A = A dBA, Unit B = B dBA, Unit C = C dBA | ||||
| (19) - EN/IEC 61000-3-12: European/international technical standard setting the limits for harmonic currents produced by equipment connected to public low-voltage system with input current > 16A and ≤ 75A per phase | ||||
| (20) - Ssc: Short-circuit power | ||||
| (21) - For detailed contents of standard accessories, see installation/operation manual | ||||
| (22) - Multi combination (10~54HP) data is corresponding with the standard multi combination | ||||